LEARN MORE ABOUT THE CLEAN & PROTECT KIT!

Shop Now

This section doesn’t currently include any content. Add content to this section using the sidebar.

AL-NEW Step 1 Clean

AL-NEW STEP 1 - CLEAN chemically breaks the bond of the oxide layer, which completely removes the chalky substance on painted aluminum impacted by exposure to heat and UV. Astounding results are achieved in just a single wipe. Instantly restore color, shine, and luster to previously faded surfaces.

  • Cleans & Restores
  • Breaks the Bonds of Oxidation
  • Easy Application

Follow up with STEP 2 - PROTECT to lock in luster and shine. 


2A-BFTV-AXKU

Size: 16 OZ

USES & APPLICATIONS

How to Use AL-NEW Step 1 Clean

Use of the AL-NEW Step 1 Clean helps remove oxidation and restore faded color on your patio furniture, windows, garage door, light fixtures, fencing, and more.This is an easy-to-apply and fast DIY alternative to repainting. Below are the instructions on how to use the AL-NEW Step 1 Clean. 

Link to video example on a patio table: Patio Table Video Example

Microfiber towel preparation for use with Step 1 Clean 

Link to video for towel prep: How to Prep your Microfiber Towel

 1. Fold (1) of the 14” x 14” microfiber towels 3 times, creating an applicator 7” x 3.5” in size.

2. Wet the folded towel by pouring a few ounces of the AL-NEW Clean in the center (you may want to do this over a paint tray to avoid any spills)

3. Squeeze the towel to distribute the liquid through the layers of the towel

4. You now have an applicator ready to clean your surface

Wipe the aluminum surface you are treating with the wet microfiber towel

Link to video: How to Apply Step 1 - Clean to a Cast Aluminum Table

1. Wipe the surface with the wet towel (prepared using the instructions above)

2. Apply moderate pressure as you wipe

3. Instant improvement will indicate removal of surface level contamination

4. Re-wet the towel frequently and rotate to clean sections of the towel when needed.

5. For tougher oxidation the walnut hand pad should be used as the next step

Critical Step for heavy oxidation:  Use the Walnut hand pad in addition to the towel  

Heavy layers of oxidation take years to develop, so a more robust solution is sometimes needed for full cleaning. Often patio tabletops show the most significant levels of white oxidation and need the walnut pad to get them clean. 

Link to video:  How to Use the Walnut Pad

1. The walnut hand pad is needed when you have heavy oxidation stains embedded in the metal. 

2. Use the walnut hand pad for a deeper level of clean not achieved with the microfiber towel alone.

3. Pads should be used on a surface still wet with Step 1 AL-NEW Clean.  Test the walnut hand pad in a small area before using on the entire object.

4. Dipping the walnut had pads in Step 1 AL-NEW Clean is a great technique to increase lubricity and improve the effectiveness of cleaning.

5. Agitate the surface with the walnut hand pad using light pressure, which will lift oxidation

6. Follow passes of your walnut pad with a wet microfiber towel to clean off oxidation

7. Continue use of the walnut hand pad until
visible white oxidation has been cleaned

8. Allow the now clean surface to dry.

Dry time is subject to environmental conditions such as direct sun or shade, temperature, and humidity. 

Tip:Best results with Step 2 Protect are achieved when Step 1 Clean is allowed to fully dry/cure prior to applying Step 2 Protect. This allows areas that may need a second pass of Step 1 Clean with the walnut pad to be revisited, prior to applying the final sealer in Step 2 Protect.

Drying time for Step 1 Clean varies due to many factors including temperature, UV Index, wind, humidity, and metal type and amount of liquid used during the cleaning process.

Best practice is to lightly buff the table with a dry microfiber cloth prior to application of Step 2 Protect.  

Safety Data Sheet

To access the Safety Data Sheet for this product, please CLICK HERE.

Search